carbon plate c15

carbon plate c15

carbon plate c15 suppliers, distributors, production and supply of carbon plate c15, are committed to providing high-quality products, as well as excellent cutting, forming, drilling and other processing services. If you have any needs, please feel free to contact:

[email protected]


carbon plate c15

C15 |C15 STEEL PLATE . C15 is a high quality low carbon steel,After forming ,carburizing or nitriding process and quenching or other . heat treatment, a structural part with wear-resistant surface and tough core can be achieved. C15 Steel, Datasheet, Properties, Cross-Reference Table Heat Treatment of steel grade C15. Heat treated :1924°C - 1754°C. Technological Curves of steel grade C15 Mat.No. 1.0401, DIN C15, AISI 1015 - Co., Ltd.Description C15 is a plain carbon steel with a nominal 0.15% carbon content. It is a relatively low strength steel but it may be quenched and tempered for increased strength. Applications The low carbon steels, such as C15, are used for applications such as cold headed fasteners and bolts. Physical properties (avarage values) at ambient temperature Modulus of elasticity [10 3 x N/mm 2]:210 C15E, 1.1141, C15, AISI 1015, XC15 - carbon steel
  • E, Ck15, 1.1141, C15, Gat. 15 - DescriptionPhysical and Mechanical PropertiesHeat Treatment and WorkingWe Deliver This Steel Alloy asCommon unalloyed steel for carburizing and hardening. A bit stronger than C10E and a bit weaker than C20E. In carburized and quenched condition it is used for light-duty parts like pivots, axles, shafts, levers, pins, bolts, nuts. In normalized condition it is used mainly for fasteners.People also askWhat are the properties of carbon steel C15?What are the properties of carbon steel C15?Properties of steel C15 (1.0401) Weldability:It is a soft carbon-steel, easily cold machinable and weldable without any particular precautions. Equivalent grades of steel C15 (1.0401) Warning!C15 / 1.0401 - SteelNumber - Chemical composition, equivalent, proper Size (A x B x C) C15 x 50, HR A36 Channels Standard

Turning and Milling [5 Sets]

Turning-and-Milling
Technical Data Wuzhong Double Column Wuzhong Double Column Schess
Height 5000mm 6000mm 6500mm 3000mm
Load Bearing 160t 400t 600t 50t
Table Diameter Φ7200mm Φ10000mm Φ10000mm Φ3500mm
Max. machining Diameter Φ8000mm Φ12500mm Φ22000mm Φ4000mm
Simultaneous 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 5-Axis Simultaneous Motion

Multi-Drilling Machine [32Sets]

Multi-Drilling Machine
Technical Parameters INNSE Italy Shenyang Machine Tool GDC60130MD, GDC3070MD DAE-YANG South Korea
X-axis, Y-axis, Z-axis 8000 4500 1000mm 13000 6000 500mm 7000 3000 500mm 6000 6000 800mm
Boring Diameter ≤Φ120mm ≤Φ100mm ≤Φ100mm Φ2 -Φ 100mm
Processing Depth ≤420mm ≤300mm ≤200mm ≤400mm

For more information, please contact:
[email protected]

Vertical Lathe [10 Sets]

Vertical Lathe
Technical Data Wuzhong Wuzhong Qizhong Qizhong Qizhong
Table Diameter Φl600mm Φ3150mm Φ3600mm Φ4000mm Φ4000mm
Max. Machining Diameter Φ2000mm Φ3500mm Φ4000mm Φ5000mm Φ5000mm
Height 1600mm 2500mm 2000mm 2500mm 4000mm
Load Bearing 5t 40t 32t 50t 50t

Floor-type Milling-boring Machine [11 Sets]

Floor-type Milling-boring Machine
Technical Data Wuzhong Wuzhong Pama
X axis
Y axis
(Z+W) axis
12000
4000
(800+800) mm
16000
5000
(1200*1200)mm
12000
3000
(1200+1000)mm
Table Size 3000*3000mm 4000*4000mm 3600*4000mm
Load Bearing 60t 100t 65t
Boring Bar Dia Φ160mm Φ200mm Φ160mm

Technical Data Pama INNSE260 INNSE280
X axis
Y axis
(Z+W) axis
20000
5000
(1200+1000)mm
17500
6000
(1400+1600)mm
25700
8000
(1800+2000)mm
Table Size 4000*4000mm 3500mm*5000mm 5000mm*9000mm
Load Bearing 100t 100t 250t
Boring Bar Dia Φ180mm Φ260mm Φ280mm

For more information, please contact:
[email protected]

Portal-type Processing Center [16 Sets]

Portal-type Processing Center
Technical Data Schess, German Okuma, Japan Wuzhong Double Column Youjia(FV4224E) Youjia(FV3215)
Height 7000mm 1850mm 3000/1750mm 5000/2000mm 1170mm 970mm
Width between Columns 8000mm 3050mm 4300mm 6000mm 2400mm 1600mm
Length 50000mm 5000mm 20000mm 28000mm 4200mm 3200mm
Table Size 8000*40000mm 2500*4800mm 3000*26000mm 5000*30000mm 2000*4000mm 1400*3000mm
Rotary table Diameter Φ6000mm —— ——
Simultaneous 7-5 Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion
Technical Data Mitsubishi I II III, Japan
Height 1950mm 1950mm 2550mm
Width between Columns 4250mm 4250mm 3800mm
Length 10200mm 8200mm 6200mm
Table Size 3500*10000mm 3500*8000mm 3000*6000mm
Rotary table Diameter
Simultaneous 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion 3-Axis Simultaneous Motion

Deep-Hole Drilling Machine [11 Sets]

Deep-Hole Drilling Machine
Technical Parameters INNSE Italy DAE-YANG South Korea
X-axis, Y-axis, Z-axis 6000 4500 1100mm 4000 3000 1000mm
Boring Diameter ≤Φ60mm Φ16-Φ80mm
Processing Depth ≤1000mm ≤1000mm

For more information, please contact:
[email protected]

Contact us